A custom dog brace gets its shape from an accurate copy of your dog's leg. For many years that copy was made by wrapping the limb in plaster or fiberglass tape, letting it harden, and cutting it off. Today the same information can be captured with a 3D scanner that records the surface of the leg in a few minutes.
Both methods aim at the same goal: a true picture of the bones, joints and soft tissue that the brace will sit against. We build our custom work from 3D scans taken by your dog's veterinary team, and this article explains why.
Why the shape of the leg matters so much
A brace is not a sleeve. It works by pressing gently in a few chosen places and leaving room in others. Bony points such as the hock, the wrist or the point of the elbow need space so they do not rub. Areas with more muscle can take more contact.
Corrective support usually comes from three points of pressure working together, one on each side of the problem joint and one opposite. If the copy of the leg is off by even a little, those pressure points land in the wrong place.
That is why the first step in any custom device is not design or materials. It is getting the limb right. A great designer cannot fix a poor model, in the same way a radiologist cannot read a blurry X-ray.

How traditional molds work
With a mold, a thin layer of casting tape is wrapped around a protected leg while someone holds the joint in the position the brace should keep. Once the tape sets, it is cut off along a line and sent to a workshop, where it is filled or scanned to create a model of the limb.
Molds have real strengths. The person wrapping can feel the leg, shape the tape by hand and hold a joint in a corrected angle while the material hardens. In skilled hands they can be very precise.
They also have limits:
- The result depends heavily on technique. Tape that is too thick, wrinkled or pulled tight can hide the landmarks a designer needs.
- Many dogs do not enjoy standing still while tape sets, and a shift at the wrong moment changes the shape.
- The mold has to be cut off without distorting it, then shipped, which takes time and can damage it.
- A physical object can be lost, crushed or warped in transit.
What a 3D limb scan captures
A 3D scanner, often a handheld unit or a tablet based device, records thousands of points on the surface of the leg and turns them into a digital model. The veterinary team can mark key landmarks, check the scan on screen and simply repeat it if the dog moved. The file is then sent electronically.
For our process, this has clear advantages:
- No shipping of fragile objects. A file arrives the same day and does not get crushed in a box.
- Easy to repeat. If part of the leg is missing from the scan, the team can rescan in minutes instead of rewrapping.
- Less handling for the dog. There is no wet tape and no cutting tool near the skin.
- A record that can be reviewed. We can look at the leg from every angle before saying whether a device can be made.
A scan still requires care. The joint should be held in the position the veterinarian wants the device to support, the fur should be smoothed or wrapped flat, and the whole limb needs to be included, from the paw to well above the problem joint. A scan of only part of the leg leaves out the areas that hold the device in place.

Why we work from scans only
We do not accept mailed casts or molds, and we do not have an address for receiving them. Every custom request we review is based on a 3D scan file sent by the dog's veterinary team, together with the basic case details. This keeps the process consistent and lets us give an honest answer early, before anyone spends money.
If your clinic does not have a scanner, ask whether a nearby specialty or rehabilitation practice does. Many referral hospitals now scan limbs for other reasons. Veterinarians can find details on what we need in a scan on our page for veterinary teams.
What the copy of the leg cannot tell us
Neither a mold nor a scan shows how the leg moves. Both record a still limb, and dogs are rarely still. That is why the diagnosis, the veterinarian's goals and good photos and video of your dog walking matter just as much as the model. The shape tells us where the device sits. The rest of the case tells us what it needs to do.
It also bears repeating that a brace supports a joint. It does not repair a torn ligament or a damaged nerve. For some conditions surgery is the better path, and your veterinarian is the right person to weigh that choice with you.
Questions owners ask
Can I scan my dog's leg at home with a phone app?
Phone scans usually miss the detail and alignment a custom device needs, and the joint position must be set by someone who understands the diagnosis. Please ask your veterinary team to take the scan.
My vet offered to make a fiberglass mold. Can I mail it?
No. We do not accept mailed casts or molds and have no address for them. If a mold already exists, your vet may be able to scan it, but a direct scan of the leg is preferred.
Does the dog need to be sedated for a scan?
That is your veterinarian's decision. Many calm dogs are scanned awake with someone gently holding them. Anxious or painful dogs may need help to stay still.
Does the scan guarantee that a device can be made?
No. The scan lets us review the case properly. We then tell you whether a device can be made and confirm the price in writing before any payment.
The quality of a custom brace begins long before it is built. A careful scan of the whole limb, taken by a team that knows your dog, gives the design the best possible starting point. When you are ready, you can read how custom devices work with us or send a question through our contact form.
Keep reading
How a Custom Dog Brace or Prosthesis Is Planned, Fitted and Checked
Why Photos and Videos of Your Dog Matter for a Custom Device Request
The Veterinarian's Role in Orthotics and Prosthetics for Dogs
