Skip to content

Free shipping on orders of $50 or more

Not sure about the fit? Ask us before you order.

FitPaws TRAX Donut Dog Balance Trainer

Regular price  $349.00
Sale price  $349.00 Regular price 

One inflatable FitPaws TRAX Donut with a pump. The low-profile body has a flattened base, central opening and textured surface for supervised canine balance practice. The circular holder is sold separately.

Use the dog’s natural front-to-back paw stance and the planned exercise to assess the setup. The manufacturer’s 16 in stance guidance concerns the dog, not the Donut’s diameter. Inflate in stages following the plug-and-cone instructions, allowing a 12–24 hour rest before completing inflation.

Read the manufacturer inflation and usage guidance and watch the original FitPaws demonstration. Additional Donuts, circular holders and other equipment shown are separate.

Free shipping on this item. Shipping policy

Not sure about the fit? Ask us before you order

Returns and refunds

Product Details

One inflatable TRAX Donut and a pump. The PVC body has a low profile, flattened base, central opening and raised texture for supervised canine balance practice.

The circular product holder is sold separately. One standard purchase option is supplied; the source does not establish selectable size or colour options or a numeric product diameter here.

Sizing & Fit

There is one standard purchase option. The 16 in (approximately 40.5 cm) figure measures the dog’s natural front-to-back paw stance; it does not describe the Donut’s diameter or circumference.

Manufacturer guidance considers all-four-paw tasks for a stance of 16 in or less if the dog fits naturally without hunching. Longer stances call for a different paw-position task or additional separately purchased equipment, according to an individual plan. No numeric product height, diameter, PSI or dog-weight limit is established here.

Setup & Care

Clean with soap and water. Some cleaning solutions may damage the plastic. Check and trim the dog’s nails before use.

As general inspection advice, check the surface, removable plug, shape and air retention before each session. Stop for damage or air loss. This is dog-only training equipment, not a toy or for human use. Small loose parts can present a choking hazard; keep plugs and tools out of reach.

One purple FitPaws TRAX Donut alone with textured surface and flattened base; circular holder not included

FitPaws TRAX Donut Dog Balance Trainer

Regular price  $349.00
Sale price  $349.00 Regular price 

DESIGN AT A GLANCE

Shape, package scope and staged inflation

Flattened base and textured surface

The inflatable Donut has a low-profile body, central opening and sensory bumps. Its surface still moves during supervised balance tasks.

One Donut and a pump

The circular holder is sold separately. A manufacturer example or owner photo showing the holder does not make it part of this purchase.

12–24 hour inflation rest

The manufacturer describes firm initial inflation, a 12–24 hour rest for material stretch, then completion. No PSI or fixed maximum dimension is supplied here.

BEFORE THE FIRST USE

Choose the paw position for a natural stance

Measure the dog’s natural stance from front feet to back feet. For considering all-four-paw core work, manufacturer guidance uses 16 in (approximately 40.5 cm) or less, provided the dog fits naturally without hunching and maintains a neutral back.

For a longer stance, the manufacturer describes tasks with two paws on the Donut and two on the floor, or arrangements using additional separately purchased equipment. These are exercise-position guides, not a weight rating, product diameter or guarantee that a particular dog can use it safely. Professional guidance should determine suitability after injury or surgery, or with pain or instability.

One purple FitPaws TRAX Donut alone with textured surface and flattened base; circular holder not included
Close construction view of one purple textured TRAX Donut with central opening and flattened base, without holder

DESIGN DETAILS

Textured inflatable Donut with a flattened base

The inflatable PVC body combines a flattened base, central opening and textured sensory bumps. A removable plug near the central opening permits air adjustment.

The manufacturer describes fuller inflation as producing less dynamic movement, while releasing a little air increases movement and the balance challenge. This does not make the Donut roll-proof, puncture-proof or safe for unsupervised use.

FIND THE RIGHT FIT

Measure the dog’s stance, not a product diameter

Sizing & Fit

There is one standard purchase option. The 16 in (approximately 40.5 cm) figure measures the dog’s natural front-to-back paw stance; it does not describe the Donut’s diameter or circumference.

Manufacturer guidance considers all-four-paw tasks for a stance of 16 in or less if the dog fits naturally without hunching. Longer stances call for a different paw-position task or additional separately purchased equipment, according to an individual plan. No numeric product height, diameter, PSI or dog-weight limit is established here.

TRAINING PREPARATION

Inflate, rest and replace the plug flush

Step 1

Remove the plug and inflate until firm

Use the included tool to remove the plug near the central opening. Insert the pump with cone attachment and follow the manufacturer’s firm initial-inflation guidance.

Step 2

Allow a 12–24 hour rest

Let the material rest and stretch for 12–24 hours, then complete inflation according to the manufacturer’s instructions.

Step 3

Replace the plug and check the stance

Cover the opening while replacing the plug, then push it flush. Inspect shape and air retention before a supported introduction; supervise and allow a comfortable neutral-back stance.

One purple FitPaws TRAX Donut alone with textured surface and flattened base; circular holder not included
Supervised beagle front paws on TRAX Donut and rear paws on floor; gray holder and harness not included

YOUR SELECTED PACKAGE

One Donut and pump; holder separate

What’s included

One inflatable TRAX Donut and a pump. The manufacturer’s inflation instructions refer to an included plug-removal tool.

The circular holder is sold separately. Extra Donuts, other training equipment, harnesses and mats appearing in manufacturer examples or owner photos are not included.

Before the first use

Remove the plug near the central opening with the included tool. Insert the pump with cone attachment and inflate until firm. Cover the opening while reinserting the plug, then press it flush.

The manufacturer describes resting the initially inflated Donut for 12–24 hours to let the material stretch, then completing inflation. Fuller inflation reduces dynamic movement; releasing a little air increases movement. Use an individual training plan rather than assuming more movement is always appropriate.

Inspect shape, plug seating and air retention, then introduce the equipment gradually with support and supervision. The Donut and circular holder are separate products; holder instructions and standalone ring exercises do not become functions or package contents of this Donut purchase.

Care & checks

Clean with soap and water; some cleaning solutions may damage the plastic. Check and trim nails before use.

One purple FitPaws TRAX Donut alone with textured surface and flattened base; circular holder not included

CARE THAT FITS YOUR ROUTINE

Clean, check nails and inspect air retention

Clean with soap and water. Some cleaning solutions may damage the plastic. Check and trim the dog’s nails before use.

As general inspection advice, check the surface, removable plug, shape and air retention before each session. Stop for damage or air loss. This is dog-only training equipment, not a toy or for human use. Small loose parts can present a choking hazard; keep plugs and tools out of reach.

Experiences shared on FitPaws

Three genuine TRAX Donut reviews from FitPaws retain their original 5-, 3- and 1-star ratings, authors and dates. Feedback includes the separate holder, unexpectedly small size and a durability/air-loss complaint. Sabina-maj and Zoo crew mom each attached a genuine photograph. These are not OrthoPets purchase reviews.

★★★★★ · 5/5

Review summary: The reviewer liked using the Donut for exercises with their own dogs, but felt they needed the separate FitPaws ring to stabilize their setup and questioned why it was not sold together. This is their individual setup experience; the holder remains a separate product.

Camila Osorio · 25 July 2021

FitPaws source review — not an OrthoPets purchase. Individual experiences vary.

Source: FitPaws

★★★☆☆ · 3/5

Review summary: English summary of the German review: the reviewer was satisfied with quality but disappointed by the size for the price, expecting roughly twice the size. Their French Bulldog only just fitted, and the separate ring purchase was another concern. This is their own fit experience, not a breed-sizing rule.

Sabina-maj · 21 September 2021

FitPaws source review — not an OrthoPets purchase. Individual experiences vary.

Source: FitPaws

Unaltered original photograph attached to Sabina-maj’s TRAX Donut review on FitPaws; other FitBone and dog bed are separate.
Sabina-maj

★☆☆☆☆ · 1/5

Review summary: The reviewer reported permanent marks from scratches or scrapes, then hissing and a worn-through spot after the third use, leaving the Donut deflated. The original one-star durability and air-loss complaint is retained; no cause beyond the reviewer’s report is established.

Zoo crew mom · 26 June 2023

FitPaws source review — not an OrthoPets purchase. Individual experiences vary.

Source: FitPaws

Unaltered original photograph attached to Zoo crew mom’s TRAX Donut review on FitPaws; gray holder is separate.
Zoo crew mom

BEFORE YOU CHOOSE

Questions about the TRAX Donut

What does the 16 in stance guideline mean?

It is the distance between the dog’s front and back feet in a natural stance, not the Donut’s diameter. The manufacturer uses 16 in or less when considering all-four-paw tasks, provided the dog fits with a neutral back; a longer stance requires a different task or arrangement. It is not a weight limit.

Does this purchase include the circular holder?

No. This purchase includes one Donut and a pump; the circular holder is sold separately. The inflation guide also refers to an included plug-removal tool. Context photographs may show the separate holder or other equipment.

How should inflation and introduction begin?

Use the plug-removal tool and pump cone attachment, inflate until firm, allow a 12–24 hour rest and then complete inflation following the manufacturer’s instructions. Replace the plug flush, check shape and air retention, and introduce the dog gradually under supervision. Seek professional guidance for rehabilitation or uncertain suitability.

You may also need

Chosen to go with this product. Check sizes on each product page.

One blue rectangular FitPaws Balance Pad with fine diamond-textured closed-cell foam and shallow straight profile
FitPaws Dog Foam Balance Pad
Regular price  $279.00
Sale price  $279.00 Regular price 
Four assorted-colour FitPaws Paw Pods shown with bumped surfaces facing up.
FitPaws Paw Pods Dog Balance Set of 4
Regular price  $249.00
Sale price  $249.00 Regular price 
Golden dog stepping through three yellow rails supported by six green and blue cones; one Cavaletti set
FitPaws K9 Cavaletti Dog Training Set
Regular price  $329.00
Sale price  $329.00 Regular price 
Scruffy dog with two rear paws on a blue 14 in FitPaws Balance Disc and two front paws on the floor
FitPaws Dog Balance Disc with Pump
Regular price  From $209.00
Sale price  From $209.00 Regular price 
Your cart
Your cart is empty
Have an account? Log in to check out faster.
Continue shopping Continue shopping
Cart total $0.00 USD
Product image Product information Quantity Product total